Tutorial

Crochet a Cropped Cape in One Piece: The Cambrie Pattern

Teal yarn and crochet hook macro photograph for cape tutorial

Crocheted cape. One long weekend of evenings. A few skeins of worsted yarn.

Teal yarn and crochet hook macro photograph for cape tutorial

I’d been wearing a big blanket-wrap style cardigan around the house for a while, and one night I kept thinking about what would happen if I made it shorter, gave it real arm openings, and added a tie at the neck. Same blanket-cozy feel, but something you could actually put on and leave the house in. That idea became this pattern: the Cambrie Cropped Cape.

What I liked most is that it’s built as one piece. You work the whole thing in continuous rows, then slip-stitch two small seams on each side to close the arm openings. No sewing, no piecing — just a few inches of joining, and you can adjust exactly how wide the armholes and side slits end up.

Materials

Everything is standard, and nothing here is a splurge item:

  • Worsted (4) weight yarn — I used Lion Brand Color Theory in Stonewash, 4 skeins for XS up to 8 skeins for 4X/5X, which is 950–1,750 yards depending on size
  • 5.5 mm (I) crochet hook
  • Tapestry needle, scissors, measuring tape
  • 2 stitch markers

Yarn price varies where you shop, so don’t expect a fixed number — but worsted weight isn’t an expensive weight to buy in, and you can use whatever brand you trust. If you’re buying a lot of yarn, buy one skein first and check your gauge before committing to the rest.

Gauge: 12 double crochets by 10 rows = 4×4 inches. To make a swatch, work 16 dc stitches, then follow the pattern’s rows 2–13. The swatch ends up larger than the gauge square, so measure a 4×4 inch area in the middle of it.

How the construction works

Sizes are XS (S/M, L/XL, 2X/3X, 4X/5X). The cape is one large rectangle worked from the bottom edge of the back up, in alternating rows: a textured row of one single crochet and one double crochet, then a plain double crochet row, repeated until the piece is long enough. Around row 43 the neckline is split — you count in 37 stitches (39 for S/M, 43 for L/XL, 47 for 2X/3X, 51 for 4X/5X) from each side, mark both spots, and leave the middle unworked. Each front panel then gets a few short increase rows at the shoulder, and the two panels are worked separately from the same live piece.

That’s the whole logic. Everything after that is edging, the tie, and closing the arm openings.

The neckline and front panels

After you split the neckline, each front panel gets a run of shaping rows — one dc into the last stitch of the row, then three dc into the next stitch to add width at the shoulder. The left front panel (the one you work second) is where I made my first real mistake: the pattern starts those rows with a chain-3 that counts as a dc, while the rest of the pattern’s dc rows start with a chain-2 that doesn’t count as a stitch. I started the left panel with a chain-2, like everything else, and the edge of my neckline came out ragged. The fix was to rip back one row and restart with the chain-3. Ten minutes of work, but I caught it before it became ten hours.

If you’re new to patterns, that’s the lesson in one sentence: read the note that tells you a chain counts as a stitch, and don’t assume the rest of the pattern works the same way.

Edging, tie, and the one real seam

Once both panels are done, the trim row works single crochet evenly up one side of the opening, across the back neckline, and down the other side — roughly 3 sc for every 2 rows. Don’t fasten off. The next row works sc along the edge and, just before you reach the last set of shoulder increase rows, drops a chain-51 loop and works it down into a slip-stitch tie. That’s the neck closure: a 51-chain tie on each side, closed or left open.

Then a plain sc border rounds out the bottom and sides, with 3 sc into each corner, and you join to the first stitch of the trim row.

Finally, fold the cape right-sides together and close the arm openings: measure about 10 inches (11–13 depending on size) down from the shoulder along the side, and slip-stitch the front and back panels together for about 4 inches. That’s the only joining in the whole project. Want deeper armholes? Start the seam higher. Want a longer side slit? Work fewer rows together.

Fasten off, weave in the ends, and block it flat. The cape sits like a cropped wrap: deep arm openings, a soft drape over the shoulders, and a tie that lets you wear it closed or open.

The full pattern

US terms. Ch 1 and ch 2 don’t count as stitches. Ch 3 counts as 1 dc.

Row 1: 95 (99, 107, 115, 123) foundation dc. Turn.

Row 2: Ch 1, 1 sc in the first stitch. *1 dc, 1 sc* across, turn. (95 (99, 107, 115, 123) sts)

Row 3: Ch 2, 1 dc in every stitch across, turn.

Rows 4–42 (42, 46, 50, 54): Repeat rows 2 and 3, ending on a row 2 repeat.

Split the neckline: Count 37 (39, 43, 47, 51) stitches from the right and place a marker. Count the same number from the left and place a marker. The stitches between are the neckline.

Row 43 (43, 47, 51, 55): Ch 2, 1 dc in the first 37 (39, 43, 47, 51) sts, leave the rest unworked, turn.

Row 44 (44, 48, 52, 56): Ch 1, 1 sc in the first stitch, *1 dc, 1 sc* across, turn.

Row 45 (45, 49, 53, 57): Ch 2, 1 dc in every stitch until 1 stitch remains, 3 dc in the last stitch, turn.

Row 46 (46, 50, 54, 58): Repeat row 44.

Row 47 (47, 51, 55, 59): Repeat row 45.

Rows 48–84 (48–108): Repeat rows 44, 45, and 2, 3 in that order, ending on a row 2 repeat. Fasten off.

Left front panel: With the right side up and the finished panel on your right, join yarn with a slip stitch at the second marker (the 37th (39th, 43rd, 47th, 51st) stitch). These rows start with a ch 3 that counts as a dc.

Row 43 (43, 47, 51, 55): Ch 3 (counts as 1 dc), 1 dc in each remaining stitch, turn.

Row 44 (44, 48, 52, 56): Ch 1, 1 sc in the first stitch, *1 dc, 1 sc* across. The last stitch is worked into the top of the ch 3 from the previous row, turn.

Row 45 (45, 49, 53, 57): Ch 3 (counts as 1 dc), 2 more dc in the same stitch as the ch 3, 1 dc in each remaining stitch, turn.

Rows 46–84 (46–108): Repeat rows 44 and 45 as above, then switch back to rows 2 and 3 (ch 2 start) for the rest of the panel. End on a row 2 repeat.

Trim: Don’t fasten off or turn. Ch 1, sc evenly up the side of the front panel — about 3 sc for every 2 rows — across the back neckline, and down the other side to the opposite corner. Turn. The stitch count here doesn’t need to be exact; keep it even.

Tie row: Ch 1, sc along until you’re just before the last shoulder increase rows (row 51 (51, 55, 59, 63) of the panel), then ch 51 and work a slip stitch down the chain, closing the loop back into the starting stitch. Continue sc to the matching row on the opposite side, make a second 51-chain tie the same way, then sc down to the bottom corner and finish with 3 sc in the same stitch. Don’t turn or fasten off.

Border: Sc along the bottom of the front panel, 3 sc in the corner, up the side, 3 sc in the corner, across the back, 3 sc in the corner, up the panel, and across the front again. When you reach the starting corner, work 2 more sc in the same spot as the first sc of the tie row, slip stitch to the first sc, and fasten off.

Arm openings: Fold the cape right-sides together. Measure about 10 (10, 11, 12, 13) inches down from the shoulder along the side, join yarn with a slip stitch through both panels, and slip-stitch them together for about 4 inches. Repeat on the other side. Weave in ends.

What I’d do differently

Next time I’d make my gauge swatch before the first full row, not after a few rows. I also would have marked my row 43 more clearly — a second marker on the row above, not just the two neckline markers. The pattern is forgiving, but the neckline split is the one row where a slip costs you real time.

And my first attempt is in the bin, where it belongs. The one with the ragged neckline. It hangs on the door of my workroom now as a reminder that the note about the ch 3 was not a suggestion.

Lesson card

Time: a long weekend of evenings, or a few focused sittings · Cost: 950–1,750 yards of worsted yarn plus a hook you already own · Level: beginner, if you can read a row with repeats

That’s the lesson.

Keep Reading